Custom Built 7 Inch 2 DIN Truck Head Unit for 24V Trucks, Buses and Fleets

Custom built 2 DIN truck head unit developed to your cab opening and harness

Native 24 volt design for medium and heavy trucks, buses and coaches

7 inch IPS capacitive touch screen at 1024 x 600

Licensed Apple CarPlay and Android Auto, wireless and wired

Bluetooth hands free calling and music streaming with built in microphone

Socket to socket wiring, no cut harness, no external step down box in the cab

Inquire Now Next Product

Product Overview

This 7 inch 2 DIN truck head unit is a custom stereo built for commercial vehicle programmes rather than a fixed catalogue part. It runs a licensed Apple CarPlay and Android Auto stack in both wireless and wired mode, drives a 7 inch IPS capacitive touch screen at 1024 x 600, and is built on a Linux system. The chassis measures 184 x 93 x 106 mm and follows the standard 2 din opening, so the unit takes the place of the original radio in the cab instead of sitting on top of the dashboard.

Six front panel keys cover microphone, power and mute, home, voice assistant, volume up and volume down, sized for a driver working with a gloved hand. Power and signal connect socket to socket through the original vehicle harness, which keeps the installation reversible and leaves no cut wiring in a vehicle that has to stay in service. Send us your target vehicle, cab type and electrical system, and we build the panel, bracket, harness, UI language and packing around it, including fitment for Isuzu Forward and Giga series cabs.

Core Specs Card

Item	Specification
Operating voltage	DC 24V
Platform	7" MP5
Operating system	Linux
Display	7 inch IPS capacitive touch screen, 1024 x 600
Installation	In-dash 2 DIN, centre console
Chassis size	184 x 93 x 106 mm
Front panel keys	MIC, Power/Mute, HOME, Voice Assistant, Volume+, Volume−
Phone integration	Wireless and wired Apple CarPlay + Android Auto, licensed
Bluetooth	v4.2, hands free calling + music streaming, built in microphone
Radio	FM 87.5–108.0 MHz, AM, RDS, FM1 / FM2 / FM3 presets
USB	Type-A (phone projection) + Type-C (charging and media)
AV / AUX input	AV IN media source
Rear camera	Rear camera input with on screen parking guidelines (camera not included)
Steering wheel control	Supported
Rear connections	Harness, rear camera in, USB, CP/AA port, GPS antenna jack, FM/AM antenna jack
GPS antenna	Active BD2 and GPS antenna included
Audio output	Max power output 4 x 40W
Operating temperature	-20°C to 70°C
Wiring	Socket to socket harness, no cut wiring
Certification	FCC / CE / RoHS
Packing	Kraft brown box, 260 x 160 x 150 mm, 1.3 kg

Four Core Advantages

A 2 DIN Body Made for the Factory Dash Opening

The chassis measures 184 x 93 x 106 mm and follows the standard 2 din opening, so the unit takes the place of the original radio in the cab. Six keys on the front panel cover microphone, power and mute, home, voice assistant, volume up and volume down, so a driver can work the unit with a gloved hand.

Licensed Wireless CarPlay and Android Auto

Both Apple CarPlay and Android Auto are licensed on this head unit and run wireless or wired. Navigation, calls, messaging and streaming music appear on the 7 inch display with no cable lying across the cab, and for a fleet programme the interface language and home screen layout can be set to your market.

Built for the 24 Volt Cab

This is the DC 24V variant, covering medium and heavy trucks, buses, coaches, trailers and construction vehicles. A 24 volt variant and a 12 volt variant share the same body, screen and feature set, so a mixed fleet can be standardised on one head unit family.

Socket to Socket, No Cut Wiring

Power and signal connect socket to socket through the original vehicle harness. On a working truck that matters: the swap is reversible, the loom stays intact, and the vehicle can be returned to its original radio if a programme changes.

Why Source This Unit

Reason	Benefit for your business
One platform, two voltages	Source 24V and 12V variants, with the same body, screen and feature set
Built around your cab	Panel, bracket and harness developed to your dash opening, so a mixed fleet does not need universal fascia kits
Licensed phone integration	Licensed wireless and wired CarPlay and Android Auto, with no third party dongle in the box
Reversible installation	Socket to socket harness keeps the original wiring intact, which shortens install time and lowers return risk
Fleet ready	Interface language, home screen layout, boot logo and packing set per market and per operator

Contact Us

Feature	This custom 24V head unit
Voltage	Native DC 24V variant, with a 12V variant on the same platform
Fitment	Panel, bracket and harness developed to your dash opening
Installation	Socket to socket through the original harness, reversible
CarPlay / Android Auto	Licensed Apple CarPlay and Android Auto, wireless and wired
Steering wheel control	Reads the original steering wheel control signals
Branding and packing	Logo, boot animation, UI language, harness and packing

Feature	Generic universal head units
Voltage	Usually 12V only, needs an external step down box on 24V vehicles
Fitment	Universal body, needs fascia kit and bracket work
Installation	Often requires cutting the factory harness
CarPlay / Android Auto	Dongle based or unlicensed in many cases
Steering wheel control	Generic learning remotes
Branding and packing	Fixed

Fleet Operators and Logistics Companies

Standardise a mixed fleet on one head unit family. The 24V and 12V variants share the same body, screen and feature set, so cab fitment, driver training and spare parts stay identical across the fleet.

Bus and Coach Operators

Licensed wireless CarPlay and Android Auto put navigation, dispatch calls and messaging on the 7 inch screen with no cable across the cab, while the interface language and home screen layout can be set per market.

Construction and Special Vehicle Upgrades

Socket to socket wiring keeps the original harness intact, so a working vehicle can be returned to its original radio when a programme ends. Panel, bracket and harness are developed to the cab you actually run.

Customizable Items

Front panel design and colour, matched to your dashboard

Mounting bracket, developed to your dash opening

Wiring harness: connector type, pin definition, cable length (65 cm standard)

Boot logo, boot animation and startup warning text

User interface language and home screen layout

Packing: box artwork, manual, label, accessory configuration

Firmware behaviour on request

Customization Process

Send requirements — Share your target vehicle, cab type, model year, market and expected volume.

Engineering evaluation — We review the dash opening, connector layout and electrical system, and reply with a fitment assessment.

Quotation and sample — We provide pricing, MOQ and a sample timeline.

Sample approval — Panel, bracket, harness, UI and packing confirmed on a physical sample, with a cab fitment test where required.

Bulk production — Scheduled manufacturing with QC checkpoints and a dedicated account contact.

Shipment and after-sales — FOB Shenzhen, CIF and DDP terms can be discussed, with warranty support.

Contact Us

Certifications and Backing

FCC / CE / RoHS — Compliance documents available per model; tell us your destination market and we confirm coverage.

Warranty — 18 months or 100,000 km for truck applications, whichever comes first, covering manufacturing defects under normal use.

Shenzhen OEM manufacturer — Specialised in vehicle specific car audio and automotive electronics.
Cab trial record — The 2 DIN unit has been trial fitted in crew cab models at both 12V and 24V, with fitting and function confirmed.

Ready to add this 24V truck head unit to your programme?

Get a tailored quotation, sample schedule and cab fitment evaluation.

Send us your target vehicle, cab type, market and estimated volume. Our engineering team replies within 24 hours.

Contact Us

FAQ

Q1: Is this a 24V unit or does it accept 12V?

A: This is the DC 24V variant, built for medium and heavy trucks, buses, coaches and construction vehicles. The 12V variant is a separate model with the same body, screen and feature set.

Q2: Will it fit my cab?

A: The chassis measures 184 x 93 x 106 mm and follows the standard 2 din opening. Send us your vehicle model, cab type and model year and we reply with a fitment assessment within 24 hours.

Q3: Does the installation cut the original wiring?

A: No. Power and signal connect socket to socket through the original vehicle harness, so a truck can be returned to its original radio if needed.

Q4: Is CarPlay and Android Auto wireless or wired?

A: Both. The unit is licensed for Apple CarPlay and Android Auto and runs in wireless or wired mode.

Q5: Does the unit come with a reverse camera?

A: The unit has a rear camera input with on screen parking guidelines. The camera itself is not included and can be supplied to match your programme.

Q6: Can we put our own logo on the unit?

A: Yes. Logo on the front panel and on the box, boot animation, startup text, UI language and packing artwork are all customizable.

Q7: Do you make both left hand drive and right hand drive versions?

A: Yes. Mounting brackets are developed per programme and both left hand drive and right hand drive layouts are supported. Tell us your cab layout when you inquire.

Q8: What certifications do you provide?

A: FCC / CE / RoHS. Tell us your destination market and we confirm certificate coverage per model.

Q9: Can we order a sample before mass production?

A: Yes. We build a sample with panel, bracket and harness matched to your cab for your fitment test.

Q10: Are you a manufacturer or a trading company?

A: We are an OEM manufacturer in Shenzhen, China, focused on vehicle specific car audio and automotive electronics.